Ready-to-Run Tesla Rear SDU
Our Tesla drive units are built to order and tailored to your specifications. We source low-mileage drive units that are in excellent condition. We then install a logic board of your choice and replace the bearings, axle seals, and ATF fluid. Finally, we bench-test each unit to ensure everything is working smoothly.
The base setup includes an Openinverter logic board and a fully labeled wiring harness. However, EV Controls and AEM options are also available. To satisfy the most demanding applications, we also offer limited-slip differential (LSD) and reverse-drive options.
Includes:
Tesla Rear Small Drive Unit
Pre-installed and configured controller: Openinverter, EV Controls, AEM
Low voltage data wiring harness
Motor Mounts
Specs:
200-420 volts DC
650 amps DC Max
220 kW (300 Hp) Max
330 Nm (243 lb-ft) Max
18,000 RPM Max
198 lbs (1.515 HP per lb)
Options:
Reverse oil pump mod for reverse-mounted applications
Quaife LSD (Installed)
Our Tesla drive units are built to order and tailored to your specifications. We source low-mileage drive units that are in excellent condition. We then install a logic board of your choice and replace the bearings, axle seals, and ATF fluid. Finally, we bench-test each unit to ensure everything is working smoothly.
The base setup includes an Openinverter logic board and a fully labeled wiring harness. However, EV Controls and AEM options are also available. To satisfy the most demanding applications, we also offer limited-slip differential (LSD) and reverse-drive options.
Includes:
Tesla Rear Small Drive Unit
Pre-installed and configured controller: Openinverter, EV Controls, AEM
Low voltage data wiring harness
Motor Mounts
Specs:
200-420 volts DC
650 amps DC Max
220 kW (300 Hp) Max
330 Nm (243 lb-ft) Max
18,000 RPM Max
198 lbs (1.515 HP per lb)
Options:
Reverse oil pump mod for reverse-mounted applications
Quaife LSD (Installed)
Our Tesla drive units are built to order and tailored to your specifications. We source low-mileage drive units that are in excellent condition. We then install a logic board of your choice and replace the bearings, axle seals, and ATF fluid. Finally, we bench-test each unit to ensure everything is working smoothly.
The base setup includes an Openinverter logic board and a fully labeled wiring harness. However, EV Controls and AEM options are also available. To satisfy the most demanding applications, we also offer limited-slip differential (LSD) and reverse-drive options.
Includes:
Tesla Rear Small Drive Unit
Pre-installed and configured controller: Openinverter, EV Controls, AEM
Low voltage data wiring harness
Motor Mounts
Specs:
200-420 volts DC
650 amps DC Max
220 kW (300 Hp) Max
330 Nm (243 lb-ft) Max
18,000 RPM Max
198 lbs (1.515 HP per lb)
Options:
Reverse oil pump mod for reverse-mounted applications
Quaife LSD (Installed)
Built to order drive units are typically ready for shipping within 4-6 weeks, depending on availability of parts.
We offer free local pickup, $150 delivery within 25 miles of 90066, or freight shipping within the USA. Contact for a freight shipping quote.
